Removed from broadcast equipment front panels
Nice C&K switch with hard to find hardware for activation

C&K (USA) – Push Switch
Sub-miniature
USA manufactured (stamped into the body)
Series: 8125
Panel mount with straight Gold plated solder tags to the rear.
Threaded shaft is a White nylon 7mm length x 3mm diameter
While the 8125 series switches are not hard to find, the associated hardware to the front is not so easy to come across …
Over this shaft is fitted the large panel screw on nut and the inner White plastic button.
I have not found other coloured buttons (yet) – all I can offer is the White button
Switch is offered with the washers
Sealed switch
Contact ratings: 0.4VA Maximum 20V AC or DC
Designed for low voltage/current control e.g system reset
DIMENSIONS:
Switch (front to rear): 28.5mm (body) 12.5mm height x 6.85mm wide
Threaded shaft 6.15mm diameter
Front Chrome plated nut (bevelled) 12.45mm at the panel end
White plastic button (removeable/changeable) 7.95mm diameter
TESTING:
Made a simple DC test to ensure the switch operates correctly and with low resistance contacts in either direction – all good here
COSMETIC CONDITION:
USED
CLEAN (Body and Terminations)
Short shaft travel for activation (nice soft touch with a tactile “click” when the state has changed)
The White plastic front button has Yellowed very slightly due to past cleaning fluids and possibly sunlight (although the latter is not likely for rack mounted gear!)
Each switch is now individually packed into sealed clear plastic packets