Extreme Networks
Model: Summit 48si (15601) with dual hot swap power modules (15603)
48x 10/100 ports
2x Gigabit GBIC ports

FEATURES:
VLAN support, auto-negotiation, layer 3 switching
Full specifications are showing in one of the photographs attached

COMPLIANT STANDARDS
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP)

REMOTE MANAGEMENT PROTOCOL
HTTP, RMON, RMON 2, SNMP 1, SNMP 2, SNMP 2c, Telnet

Management port is a DB9M

AC 240V Dual Hot Plug power supplies

HISTORY:
Working environment, retired from service – fully functional

COSMETIC CONDITION:
Clean with some usual minor scuff marks to the top of the cabinet.
Rack ears are fitted
*** One of the hot swap power supplies has damage to the “pull handle” – it still works as a handle and the module is easy to insert/remove. I have checked INSIDE the power module to ensure no damage has occurred inside the power module – all is good.
Dimensions: 1RU Standard width x 440mm
Weight approximately 8Kg fully loaded with the dual psu’s

TESTING:
Powers up, boots fine
Although one hot swap power supply has severe drop damage to the pull handle (see above), it has been throughly checked and is functioning correctly
Green light on both power modules – no alarms
Fans running at “normal” noise levels – which is pretty high dBA levels in equipment of this type.
See screen shots of both bootup and login showing current system details
Running Extremeware 7.8
System has been reset so login/password is
admin
BLANK (meaning, just use no character entered)
So management access is clean as is the current configuration. I have not undertaken any further configuration steps.

If required, I can supply the complete manual for Extremeware 7.8 on a CD (PDF format – 1100+ pages!)